Clean P90 Tone, No Hum
Stand out in the mix and cut through with the Lindy Fralin-designed P-92. A full-size humbucker with unique looks, the P-92 is a cleaner, more articulate P-90, with no hum. If you’re looking for the perfect blend of a traditional single-coil and a P90, look no further than this pickup here. Made by hand in Virginia with all USA-Made Parts, we guarantee the P-92 will inspire you for years to come.
Stand Out. Cut Through.
Want to learn more about our P-92? Here's all the information you'll need:
Are you seeking a more “polite” P90 tone with no hum? The P-92 is the pickup for you. Incredibly versatile, this pickup features bright wound strings with round treble strings. It’s perfect for Rock, Blues, Country, and Jazz.
Lindy’s unique Split-Single design allows you to achieve a genuine single-coil tone with zero hum, all packed in an awesome-looking humbucker. The USA-Made Alnico 5 bar magnet gives you a tight attack and bite, with a clear low-end and stiff treble.
- Lindy Fralin Original Design
- Clean, articulate P90 tone in a Humbucker size
- Strong and bold – lots of midrange and snarl
- USA-made Alnico 5 Magnets for aggressive tone and output
- Compensated Bridge for even volume across all pickups
- Fully Hum-Cancelling and silent in all positions
- Adjustable Steel Pole pieces for fine-tuning string balance
- Hand-wound with our “Sectioning” technique for unique, dynamic tone
- Hand-built for unrivaled quality control
- Backed by our 10-Year Warranty on manufacturing defects
- Risk-free 30-day exchange policy
As we’re sure you’re aware, a known challenge with P90 pickups is the hum. Rest assured: we’ve solved that problem and found a unique, versatile sonic footprint where the P-92 fits perfectly.
The P-92 features a cleaner and more articulate overall tone. It’s more “polite” than our Hum Cancelling P90s, and much clearer-sounding than our Pure P.A.F. That said, the P-92 offers you a thick, warm midrange accompanied by a stiffer and rounder treble – perfect for many music styles.
The P-92 is quick to break up, but you’ll find that it’s still clearer, like traditional Vintage P90s. Built with alnico V magnets, we use 42-gauge or 43 gauge wire depending on the strength you need.
When playing clean, you’ll find that this pickup has a thicker, bold tone with a stiff high end. With distortion, you’ll find that the grind is dirtier than our Big Single, but not as much as a typical Humbucker.
Players who want a sparkly-top end should look at our Twangmasters, as our P-92’s sound more like a Gibson.
It all starts here: our manufacturing process allows us to achieve unparalleled quality control. Our P-92’s consist of USA-Made bobbins, baseplates, magnets, and wire.
We wind each pickup by hand, one at a time using our proprietary “Sectioning” technique. This gives the pickup a sweet, bright tone. We assemble each pickup one at a time, by hand. This allows us to achieve unbeatable attention to detail. Finally, we wax-pot the pickup to prevent microphonics and to preserve the pickup for years to come.
Tonal Graph For P-92:
The tonal graph below for our P-92 features Lows, Midrange, Highs, and general Output.
Attack: Stiff & Percussive
Videos for P-92:
Lead Color Codes
See below for our Lead color codes. For help with matching to other manufacturers, check out this resource here.
Gibson Braided Lead:
See below for the estimated DCR and Polarity Information for our P-92.
|Neck Ohm Reading (Stock):
|Bridge Ohm Reading (Stock):
|Reversible with 2-Conductor Lead
|USA-Made Alnico 5 bar magnet
|USA-Made 42 / 43-Gauge Single Poly Nylon
|USA-Made Nickel Silver
|USA-Made Nickel Silver
|USA-Made Steel Screws
|Available String Spacing:
|Humbucker Leg Depth:
|Recommended Pot Value:
|Recommended Cap Value:
1 Ohm Readings can vary due to a multitude of factors, including ambient temperature, multimeter calibration, different wire batches, and other factors. Due to this, ohm readings are approximate. Learn more about Ohm Readings here.
2 We recommend a 0.02mfd Cap Value on most guitar and bass pickups. The exception is a Magic Cap, which Lindy prefers on the Bridge Pickup of Fender® guitars only. Learn More about Caps Here.
* Due to the unique design of this pickup, ohm readings are not useful when comparing to other models. This pickup is medium output, and leans to a cleaner, clearer tone.
Here are quick answers to common questions we get:
What Ohm Readings does your P-92 have?
Navigate to our Tech Specs Tab for complete Ohm Readings and more useful information.
Will this pickup fit my instrument?
Check our "Sizing" tab for the size of the pickup. No Sizing tab? Check under the product image gallery for dimensions.
Is your Lead Time of 3-4 Weeks accurate?
It really depends on the shop capacity at the moment, and the size of your order. Feel free to give us a call for an accurate lead time. We always try to underpromise and overdeliver.
What pickup height do you recommend setting your P-92s to?
Our recommended Pickup Height is 1/8" (3.175mm) on the Bass Side and 1/16"( 1.5875mm) on the Treble Side. Measure by holding the corresponding side down at its highest fret and measure from the bottom of the string to the top of the pole piece.
Our P-92 pairs well with the following models:
Steel Pole 43 Tele - Bridge
Starting At: $ 115
Pair the P-92 with a Steel Pole 43 Tele Bridge for a killer Humbucker-Tele combinationView Product
Split Steel Poled Tele - Bridge
Starting At: $ 129
The Split Steel Poled Tele Bridge is the perfect hum-cancelling companion the the P-92View Product
Sunbucker Blues® - Bridge
Starting At: $ 160
If you're looking for a clean PAF tone in the Bridge, the Sunbucker Blues will work well with the P-92 in the NeckView Product
Reviews We Worked Hard For, and Are Proud Of
There are no reviews yet.
STAY IN TOUCH