Lindy Fralin Pickups '50s Wiring
Mar 01

What’s The Difference Between ’50s Wiring and Modern Wiring?

This is a very high-level overview of this topic. Different Tone Caps, Pickups, body woods, playing styles, etc. will all affect the outcome of your tone.

’50s Wiring vs. Modern Wiring – What Gives?

If you have a Les Paul®, or Telecaster Deluxe, chances are you have run into this thing called “’50s Wiring“. What is it? Is Modern Wiring better? (spoiler alert: Not necessarily)

Gibson 50’s wiring only refers to how the tone cap is wired into the guitar.

’50s Wiring applies to any guitar with two pickups, each with their own respective Volume Pot and Tone Pot. It involves how the tone cap is wired into the guitar. There are many ways to wire a Tone Cap, but, without getting too technical, the way the tone cap connects between your pots actually changes how your Volume Pots and Tone Pots interact with each other. There are subtle differences between the two that might actually suit your playing style better. Let’s explain the difference between 50’s Wiring and Modern Wiring:


50s Wiring For Guitar

With ’50s Wiring, the tone cap connects to the middle lug of the Volume Pot, and Lug 3 of the Tone Pot.

Pros of ’50s Wiring:

  • Pickup tone stays consistent when turning down the Volume Pot.
  • Pickups don’t lose high frequencies when turning down the Volume Pot.
  • High frequencies tend to stay clear with the Volume Pot in it’s lower ranges.

Cons:

  • Turning down the tone pot can affect the pickup’s volume.
  • Some high-gain situations can yield an overly bright tone.

With Modern Wiring, the Tone Cap connects to the Input Lug of the Volume Pot.

Pros of Modern Wiring:

  • The Tone Pot will not affect your pickup’s volume.
  • A smoother tone in general, which some players like.

Cons:

  • Turning down the Volume Pot will send some high frequencies to ground, darkening your tone.

Which Wiring Is Better For Me?

It depends! As listed above, you can tell that there are subtle trade-offs between the two wiring schemes. If you have a dark-sounding guitar, you might like the 50’s Wiring. If you play a softer-style of music, you might like the rolled off high frequencies provided by the Modern Wiring.

With such an easy modification to make, we urge you to experiment. See what works best for you, your guitar, and your playing style!

Tyler @ Fralin Pickups

Tyler Delsack is the Manager of Fralin Pickups and spends his time editing and maintaining the website, designing graphics and ads, and making pickups. He's powered by Jazz Guitar, Vietnamese Food, Hiking, and Beer.

4 Comments

  1. Although correct that you will experience a loss of treble with modern wiring when turning the volume pot down (or using very long patch cables from the guitar to the pedal/amp), there are ways to combat this. One way is to attach a ~150k resistor and 1nF capacitor in parallel between the input lug and hot output to the jack of the volume pot. This works fine for single coil guitars like a Strat or a Tele.

  2. Easily explained, without being a technician I got the difference between 50 and modern wiring.
    Keep going on

  3. Hi! I really like the article, and found it very educating. It explains a lot regardig how this simple modification can provide options for someone not liking how their current wiring. I personally went with ’60s wiring and would like to read in depth analisys of that kind of wiring. It is also simple to do and it has is’s own benefits…

    Kind regards,
    Josip

  4. Tyler, thanks for the article on 50s wiring vs modern wiring! Is there any difference between them when backing off the volume to clean up the signal from a gain pedal (overdrive, fuzz, or distortion pedal)? If I understood your article correctly, the 50s wiring behaves as what’s now called, a treble bleed circuit.
    Thanks again!
    John

Leave a Reply

Your email address will not be published. Required fields are marked *