Pre-Wired Customizable Telecaster Control Plate

(69 customer reviews)

$100.00$110.00

Customize and upgrade your Telecaster, instantly with the Lindy Fralin Telecaster Control Plate. With over 150 combinations available, you can select your options, and we’ll wire it up just how you like it. Installation involves soldering a few wires into place. As always, we only use the finest-quality USA-Made parts we can find.

PRODUCT OPTIONS:
Clear

Add-Ons

We can wire up an output jack, or pre-install our Volume Kit for a few extra bucks!

Volume Pot Push-Pull Mods

You can add functionality to your tone by adding a Push-Pull Pot on your Volume Pot. Choose between our Bright Switch, Engage / Disengage Volume Kit Mod, or a regular Coil Split if you have a Humbucker.

Tone Pot Push Pull Mods

Need even more functionality? Choose between the Bright Switch, Two-Tone Cap Mod, and Series Parallel Push-Pull Mod..

Tone Cap

We will hook you up with 2 tone caps if you choose two tone pots. Please use the “Additional Information” field below to tell us which tone cap goes where. If the Two-Tone Cap Push Pull Pot is chosen, select two tone cap values and let us know how you would like it to work.

Additional Information:

To speed up your Control Plate, we need to know which tone cap goes where – please use this field to give us all information!


Pre-Wired Customizable Telecaster Control Plate Info:

Want to learn more about our Pre-Wired Customizable Telecaster Control Plate? Here's all the information you'll need:

Pre-Wired Customizable Telecaster Control Plate FEATURES:

Our Pre-Wired Telecaster Control Plate is designed by you and built by us. Chrome and Aged Chrome Prewired Control Plates come loaded with the highest quality materials available – from CRL® and Oak-Grigsby® Switches to CTS® Pots. Of course, all our parts are made in the USA and are assembled and wired by hand in Richmond, VA.

Look & Feel

We offer Chrome Telecaster Control Plates and Aged Nickel Telecaster Control Plates. Aged Nickel Telecaster Control Plates all have a unique patina to them to make them look slightly reliced and older. Due to the aging process, each Aged Nickel Telecaster Control Plate is unique, and no two are alike.

Orientation:

We can wire up your Tele Control Plate a couple of different ways: Normal Orientation and Flipped Orientation.

  • Normal Orientation: With a Normal Orientation Telecaster Control Plate, your switch is closest to the headstock.
  • Flipped Orientation: With a Flipped Orientation, the Control Plate orients with the Switch closest to the Output Jack, and the Volume Pot closest to the headstock. This is great for those who love to utilize volume swells.

Lindy Fralin Pickups Normal Or Flipped Orientation

Wiring

We can wire up your switch a couple of different ways – here are your options:

  • 3-Way CRL: This will give you normal Telecaster functionality – Bridge Only / Bridge – Neck / Neck Only.
  • 5-Way CRL: This is perfect for Nashville Telecasters, with three pickups.

Pot value:

Choose 250K Pots if you have single-coil Telecaster pickups or pickups that are brighter. 250K pots will make darker sounding pickups too dark and muddy.

Choose 500K Pots if you have Humbuckers, P-90’s, or other dark-sounding pickups. 500K pots will make single-coil Telecaster pickups sound too shrill.


Tone Cap Value:

Read up on our Tone Caps here.

  • .02 mfd sounds excellent on most Fender guitars and will give you a medium roll-off in tone.
  • .05 mfd will offer a much deeper and darker roll-off than .02.
  • Magic Cap: This is a low capacitance cap (.0015 mfd) and only works on the Bridge Pickup only. The effect is extremely subtle – not like a regular cap. It tends to make treble strings sound slightly fatter.

Mods

We can add some cool push-pull modifications to your control plate to shape your unique sound. For an explanation of the Bright Switch, click here.

The 2-Tone Cap Modification allows you to have two-tone caps on your guitar at the same time. If you want this, please let us know in the “Order Notes” field on the checkout screen which cap you want when pushed down, and what cap you want when pulled up.

FAQs

  • How long will my Control Plate take? Please give us five days to build and assemble your Control Plate. All orders are made to order and wired by hand.
  • Can you wire it up without the Chrome Plate? As it turns out, No. If this matters to you, you can pull out all the wiring once you receive it to put it in your Control Plate. It’s just too time-consuming and unsafe to ship without a solid control plate holding everything together.
  • Can I return my Control Plate? No. Since these are so custom and made to order, all Telecaster Control Plate sales are final, and not available for exchange or return.
  • What if I don’t see what I want? Please use the “Notes” field on the checkout screen to type in any special requests. Use this field to describe how you want it wired as well if you wish to have anything customized. We’ll make it to your specs.
  • Do you offer different knobs and plates? We can special-order these – please add 2 -3 weeks to your order.

Sizing:

Fralin Telecaster Control Plate Dimensions

Installation

Installation is easy, and only takes  a few steps. Check out our in-depth Telecaster Control Plate Installation Guide Below:

FEATURES:

Our Pre-Wired Telecaster Control Plate is designed by you and built by us. Chrome and Aged Chrome Prewired Control Plates come loaded with the highest quality materials available – from CRL® and Oak-Grigsby® Switches to CTS® Pots. Of course, all our parts are made in the USA and are assembled and wired by hand in Richmond, VA.

Look & Feel

We offer Chrome Telecaster Control Plates and Aged Nickel Telecaster Control Plates. Aged Nickel Telecaster Control Plates all have a unique patina to them to make them look slightly reliced and older. Due to the aging process, each Aged Nickel Telecaster Control Plate is unique, and no two are alike.

Orientation:

We can wire up your Tele Control Plate a couple of different ways: Normal Orientation and Flipped Orientation.

  • Normal Orientation: With a Normal Orientation Telecaster Control Plate, your switch is closest to the headstock.
  • Flipped Orientation: With a Flipped Orientation, the Control Plate orients with the Switch closest to the Output Jack, and the Volume Pot closest to the headstock. This is great for those who love to utilize volume swells.

Lindy Fralin Pickups Normal Or Flipped Orientation

Wiring

We can wire up your switch a couple of different ways – here are your options:

  • 3-Way CRL: This will give you normal Telecaster functionality – Bridge Only / Bridge – Neck / Neck Only.
  • 5-Way CRL: This is perfect for Nashville Telecasters, with three pickups.

Pot value:

Choose 250K Pots if you have single-coil Telecaster pickups or pickups that are brighter. 250K pots will make darker sounding pickups too dark and muddy.

Choose 500K Pots if you have Humbuckers, P-90’s, or other dark-sounding pickups. 500K pots will make single-coil Telecaster pickups sound too shrill.


Tone Cap Value:

Read up on our Tone Caps here.

  • .02 mfd sounds excellent on most Fender guitars and will give you a medium roll-off in tone.
  • .05 mfd will offer a much deeper and darker roll-off than .02.
  • Magic Cap: This is a low capacitance cap (.0015 mfd) and only works on the Bridge Pickup only. The effect is extremely subtle – not like a regular cap. It tends to make treble strings sound slightly fatter.
Mods

We can add some cool push-pull modifications to your control plate to shape your unique sound. For an explanation of the Bright Switch, click here.

The 2-Tone Cap Modification allows you to have two-tone caps on your guitar at the same time. If you want this, please let us know in the “Order Notes” field on the checkout screen which cap you want when pushed down, and what cap you want when pulled up.

FAQs
  • How long will my Control Plate take? Please give us five days to build and assemble your Control Plate. All orders are made to order and wired by hand.
  • Can you wire it up without the Chrome Plate? As it turns out, No. If this matters to you, you can pull out all the wiring once you receive it to put it in your Control Plate. It’s just too time-consuming and unsafe to ship without a solid control plate holding everything together.
  • Can I return my Control Plate? No. Since these are so custom and made to order, all Telecaster Control Plate sales are final, and not available for exchange or return.
  • What if I don’t see what I want? Please use the “Notes” field on the checkout screen to type in any special requests. Use this field to describe how you want it wired as well if you wish to have anything customized. We’ll make it to your specs.
  • Do you offer different knobs and plates? We can special-order these – please add 2 -3 weeks to your order.
Sizing:

Fralin Telecaster Control Plate Dimensions

Installation

Installation is easy, and only takes  a few steps. Check out our in-depth Telecaster Control Plate Installation Guide Below:


CUSTOMER REVIEWS

69 reviews for Pre-Wired Customizable Telecaster Control Plate

5 star
98%
4 star
1%
3 star
0%
2 star
0%
1 star
0%
Showing 1 of 69 reviews (4 star). See all 69 reviews
  1. Norman Trahan (verified owner)

    Love the tonal options with the 4-way switch. The push pull tone mod is nice but it turns very easy, I wish it was a bit harder to turn. Also when the switch is in the neck position it is right up against the tone knob, so when you reach for it from the top on the fly you’ll tend to bump it and roll the tone towards zero when switching to bridge position. So I started to reach for the switch from the bottom, that way when you bump the tone knob it will roll towards 10. Besides those couple of minor things Lindy and his guys are great to deal with!

Add a review

Your email address will not be published. Required fields are marked *

Trying to leave a review for our Pre-Wired Customizable Telecaster Control Plate? Leave one here.