Back Plate Noise Canceling System (BPNCS) $200

BPNCS The BPNCS from Ilitch Electronics effectively cancels the noise while keeping the true single coil pickup tone intact.

Everyone can install the BPNCS since it doesn't require any modifications to the guitar. Unscrew the guitar pickguard, replace the existing back plate tremolo cover, solder the wires to the existing guitar electronics (following the provided BPNCS user's manual and installation instruction), assemble back the guitar and you are ready to play it again.

Everyone can install the BPNCS since it doesn't require any modifications to the guitar. It does require all three pickups wound in the same direction, (non-rev-mid). If you have our pickups in your guitar we will modify or replace your reverse middle pickup at no charge when buying a system. To install a system, unscrew the guitar pickguard, replace the existing back plate tremolo cover, solder the wires to the existing guitar electronics (following the provided BPNCS user's manual and installation instruction), assemble back the guitar and you are ready to play it again.

Now you can enjoy the beauty of the single coil pickup tone and without the annoying noise.

BPNCS Available colors BPNCS REG:
- Parchment
- Black - Matt
- White/Black/White

 

The BPNCS is also available for Tele-style guitars,
including Nashvile (3 pickups) Teles.

Tele Back Plates

Blues Special Strat Replacements with Back Plate Noise Canceling