Unbucker
Unbalanced Coils For Coil Splitting
$160 – $320
The Lindy Fralin Unbucker gives you great split-coil and humbucking tones – all in one. The unbalanced Unbucker’s coils give you a stronger single coil tone when split.
Quick Links
Jump to Sound Clips and more Info:
Unique Humbucker Design For Coil Splitting
Want to learn more about our Unbucker? Here's all the information you'll need:
Features:
The Lindy Fralin Unbucker is one of our best-selling pickups. We’re known all over the world for incredible-sounding Single-Coil and Humbucker pickups. Why not combine them both and get the best of both worlds? The Unbucker provides fantastic Humbucker tones as well as Single-Coil tones. We purposely unbalance the coils to give you a stronger coil when the Unbucker is Split.
Our Stock Set includes a 7.5K Neck and 8.5K Bridge.
Features:
- Unbalanced coil turns for a stronger single-coil tone (Screw Coil)
- Scooped midrange with an emphasis on top-end clarity
- AlNiCo IV Magnets for a smooth, rich sound
- Fits any Standard Humbucker or F-Spaced Humbucker routing
- Assembled by hand, one at a time, for impeccable attention to detail
- Compensated Overwound Bridge for even volume across all pickups
- Hand-wound with our “Sectioning” technique for unique, dynamic tone
- Hand-built for unrivaled quality control
- 10-Year Warranty on manufacturing defects
Sound
Bright and clear, with just the right amount of chime and an open midrange. Our Unbucker features a stronger wound screw coil that gives this pickup a unique tone. Our Unbucker has a similar vibe to our Pure P.A.F. with a more open and airy midrange and top end. Expect outstanding clarity and articulation. When you tap the slug coil, you still achieve a robust single-coil tone. When playing dirty, you’ll get a nice, sharp pick attack and excellent clarity, and a tight and punchy low end. Due to the unbalanced coils, Unbuckers won’t be 100% hum-canceling.
Our manufacturing process allows us to achieve unparalleled quality control. We wind each pickup by hand, one at a time. Each pickup is wound using our proprietary “Sectioning” technique. Doing this gives the pickup a sweet, clear tone. Finally, we assemble each pickup one at a time, by hand. Hand assembling pickups allows us to achieve unbeatable attention to detail. After assembly, we wax-pot the pickup to preserve the pickup and prevent microphonics.
Sound Samples for Unbucker:
About this Sound Clip:
All sound samples are played from Neck Position First and Bridge Position Last.
This is out Stock Output of Unbuckers played on an Epiphone Les Paul. Sound Clips recorded by Phil Heesen III.
Tonal Graph For Unbucker:
The tonal graph below for our Unbucker features Lows, Midrange, Highs, and general Output.
Attack: Dynamic & Full
Videos for Unbucker:
Humbucker Lead Color Codes
See below for our Humbucker Lead color codes. For help with matching to other manufacturers, check out this resource here.
Gibson Braided Lead:
Gibson-Style instruments
Phase Reversible
Coil Splitting
3-Conductor Lead:
Phase Reversible
Coil Splitting
4-Conductor Lead:
Phase Reversible
Series Parallel Wiring
Coil Splitting
Tech Specs:
See below for the estimated DCR and Polarity Information for our Unbucker.
| SPECIFICATION | VALUE |
|---|---|
| Neck Ohm Reading: | 7.5K 1 |
| Bridge Ohm Reading: | 8.5K 1 |
| Neck Polarity: | Reversible with 3-Conductor Lead |
| Bridge Polarity: | Reversible with 3-Conductor Lead |
| Magnet: | USA-Made Alnico 4 |
| Wire: | USA-Made 42-Gauge Single Poly Nylon |
| Baseplate Material: | USA-Made Nickel Silver |
| Cover Material: | USA-Made Nickel Silver |
| Pole Piece Material: | USA-Made Steel |
| Bobbin Material: | ABS Plastic |
| Baseplate Leg Depth: | 6mm |
| Recommended Pot Value: | 500K |
| Recommended Cap Value: | 0.02mfd 2 |
More Information:
1 Ohm Readings can vary due to a multitude of factors, including ambient temperature, multimeter calibration, different wire batches, and other factors. Due to this, ohm readings are approximate. Learn more about Ohm Readings here.
2 We recommend a 0.02mfd Cap Value on most guitar and bass pickups. The exception is a Magic Cap, which Lindy prefers on the Bridge Pickup of Fender® guitars only. Learn More about Caps Here.
Covered Humbucker
Uncovered Humbucker
Unbucker FAQ's
General FAQs
Here are quick answers to common questions we get:
-
What Ohm Readings does your Unbucker have?
Navigate to our Tech Specs Tab for complete Ohm Readings and more useful information.
-
Will this pickup fit my instrument?
Check our "Sizing" tab for the size of the pickup. No Sizing tab? Check under the product image gallery for dimensions.
-
Is your Lead Time of 3-4 Weeks accurate?
It really depends on the shop capacity at the moment, and the size of your order. Feel free to give us a call for an accurate lead time. We always try to underpromise and overdeliver.
-
What pickup height do you recommend setting your Unbuckers to?
Our recommended Pickup Height is 1/8" (3.175mm) on the Bass Side and 1/16"( 1.5875mm) on the Treble Side. Measure by holding the corresponding side down at its highest fret and measure from the bottom of the string to the top of the pole piece.
Get It Prewired
Get our Unbucker prewired into a Prewired Pickguard!:
Featured Reviews
Reviews We Worked Hard For, and Are Proud Of
There are no reviews yet.
STAY IN TOUCH
Be the first to review “Unbucker”
Leave a review for our Unbucker