Split ’51 P-Bass
Hum-Free '50's P-Bass Tone
$150
Our Lindy Fralin Split ’51 P-Bass is a great single-coil tone replacement for 50’s and reissues. Loud and clear, with no hum. Using USA-Made parts and made by hand, our pickups sound leaps and bounds better than the stock pickups. This is the Hum-Cancelling version of our ’51 P-Bass.
Quick Links
Jump to Sound Clips and more Info:
All '50s P- Bass, Zero Hum.
Want to learn more about our Split '51 P-Bass? Here's all the information you'll need:
Split ’51 P-Bass FEATURES:
Our combination of authentic 50’s P-Bass tone and a Left-Right Coil Design give you killer tone, with no hum! With no modification necessary, the Fralin Split ’51 will drop right into your era-authentic bass or re-issue with ease. This pickup will fatten up your bass up a bit, too. The Fralin Split ’51 is our hum-canceling version of our Fralin ’51 P-Bass Pickup.
- Lindy Fralin Original Design – Completely Hum-Cancelling
- Original Fender specifications, with modern output
- Superb articulation for a clean and clear tone
- Designed to be even across all frequencies
- USA-made Alnico 5 Magnets for optimal tonal balance and output
- Hand-wound with our “Sectioning” technique for unique, dynamic sound
- Hand-built fiberboard Bobbins for unrivaled quality control
- 10-Year Warranty on manufacturing defects
Sound
Warm, rich, full, with no hum. The top end is warm and round; the low end is full, deep, and dynamic. Our Fralin Split ’51 is the perfect pickup for those who want an era-authentic 50’s P-Bass tone with no hum. The extended low end is deep, rich, and full. Alnico 5 Magnets give this pickup optimal tonal balance and output. By adding a second coil, we were able to achieve a completely silent operation, with a hint of fatness added to it.
It starts here: our manufacturing process allows us to achieve unparalleled quality control. Our Split ’51 P-Bass Pickups consist of USA-Made magnets and wire. Our bobbins are hand-built using local fiberboard and have incredible attention to detail. We wind each pickup by hand, one at a time. Each pickup is wound using our proprietary “Sectioning” technique. This gives the pickup a sweet, clear tone. We assemble each pickup one at a time, by hand. This allows us to achieve unbeatable attention to detail. Finally, we wax-pot the pickup to preserve the pickup and prevent microphonics.
Tonal Graph For Split ’51 P-Bass:
The tonal graph below for our Split ’51 P-Bass features Lows, Midrange, Highs, and general Output.
Attack: Dynamic & Full
Videos for Split ’51 P-Bass:
Tech Specs
See below for the estimated DCR and Polarity Information for our Split '51 P-Bass.
SPECIFICATION | VALUE |
---|---|
Stock Ohm Reading: | 6.85K 1 |
String Spacing (String to String): | 18mm |
Magnet Wire: | USA-Made 42-Gauge Single Poly Nylon |
Magnet Material: | USA-Made Alnico 5 |
Bobbin Material: | USA-Made Fiberboard |
Recommended Pot Value: | 250K |
Recommended Cap Value: | 0.02mfd 2 |
More Information:
1 Ohm Readings can vary due to a multitude of factors, including ambient temperature, multimeter calibration, different wire batches, and other factors. Due to this, ohm readings are approximate. Learn more about Ohm Readings here.
2 We recommend a 0.02mfd Cap Value on most guitar and bass pickups. The exception is a Magic Cap, which Lindy prefers on the Bridge Pickup of Fender® guitars only. Learn More about Caps Here.
Split ’51 P-Bass Dimensions:
Split ’51 P-Bass FAQ's
General FAQs
Here are quick answers to common questions we get:
-
What Ohm Readings does your Split ’51 P-Bass have?
Navigate to our Tech Specs Tab for complete Ohm Readings and more useful information.
-
Will this pickup fit my instrument?
Check our "Sizing" tab for the size of the pickup. No Sizing tab? Check under the product image gallery for dimensions.
-
Is your Lead Time of 2-3 Weeks accurate?
It really depends on the shop capacity at the moment, and the size of your order. Feel free to give us a call for an accurate lead time. We always try to underpromise and overdeliver.
-
What pickup height do you recommend setting your Split ’51 P-Basss to?
Our recommended Pickup Height is 1/8" (3.175mm) on the Bass Side and 1/16"( 1.5875mm) on the Treble Side. Measure by holding the corresponding side down at its highest fret and measure from the bottom of the string to the top of the pole piece.
There are no reviews yet.
STAY IN TOUCH
Be the first to review “Split ’51 P-Bass”
Leave a review for our Split '51 P-Bass