Prewired Telecaster Control Plate

$100

  • Customizable
  • USA-Made
  • Easy Installation

New Soundclips Coming Soon

( 138 genuine reviews)

Customize and upgrade your Telecaster, instantly with the Lindy Fralin Telecaster Control Plate. With over 150 combinations available, you can select your options, and we’ll wire it up just how you like it. Installation involves soldering a few wires into place. As always, we only use the finest-quality USA-Made parts we can find.

Options

Select options for our Prewired Telecaster Control Plate:

Select Options Above To Display Add-Ons

Add-Ons

Pre-install our Volume Kit for a few extra bucks. Add Resistors to optimize your tone if you have a Tele with a Humbucker or P90 in the Neck or Bridge. Only select the Resistor where the brighter pickup will be. For instance, if you have a Humbucker Neck, add a 500K resistor to your Bridge.

Volume Pot Push-Pull Mods

You can add functionality to your tone by adding a Push-Pull Pot on your Volume Pot. Choose between our Bright Switch, Engage / Disengage Volume Kit Mod, or a regular Coil Split if you have a Humbucker.

Tone Pot Push Pull Mods

Need even more functionality? Choose between the Bright Switch, Two-Tone Cap Mod, and Series Parallel Push-Pull Mod..

Tone Cap

If the Two-Tone Cap Push-Pull Mod is chosen, select two tone cap values and use the “Notes” field to let us which cap you want in the “up” or “down” position.

Output Jack *

Let us know what Output Jack to install. The Pure Tone Output Jack contains dual tension grounds and dual positive tips for optimal signal and the lowest possible noise.

Esquire Wiring

Wiring for an Esquire? Check the box below for Eldred Wiring. We use a Film & Oil .0047 cap for a unique tone. Note: This mod is for Single Pickup Guitars only.

Left Handed

We can make your control plate in a Left-Handed configuration. Please note that Push Pull Pot mods are unavailable in a Left-Handed configuration.

Additional Information:

To speed up your Control Plate, we need to know which tone cap goes where – please use this field to give us all information!

Notice

Due to the nature of Raw Nickel, Raw Nickel may contain slight cosemetic defects or abrasions.

Recommendation

We recommend using 2-Conductor With Shield Lead when purchasing a single pickup. 2-Conductor lead allows you to reverse the phase should you have phase issues. Learn About Lead Choice

Upgrade To A Prewired Pickguard

Express Checkout

Skip the checkout and buy now. Purchases made through Express Checkout are bound by our Terms and Conditions.

More Payment Options Offered At Checkout:

Our Wiring Skills, Your Personality.

Want to learn more about our Prewired Telecaster Control Plate? Here's all the information you'll need:

Prewired Telecaster Control Plate FEATURES:

Our Pre-Wired Telecaster Control Plate is designed by you and built by us. Chrome and Aged Nickel Prewired Control Plates come loaded with the highest quality materials available – from CRL® Switches to CTS® Pots. Of course, all our parts are made in the USA and are assembled and wired by hand in Richmond, VA.

Look & Feel

We offer Chrome Telecaster Control Plates and Aged Nickel Telecaster Control Plates. Aged Nickel Telecaster Control Plates all have a unique patina to them to make them look slightly reliced and older. Due to the aging process, each Aged Nickel Telecaster Control Plate is unique, and no two are alike.

Orientation:

We can wire up your Tele Control Plate a couple of different ways: Normal Orientation and Flipped Orientation.

  • Normal Orientation: With a Normal Orientation Telecaster Control Plate, your switch is closest to the headstock.
  • Flipped Orientation: With a Flipped Orientation, the Control Plate orients with the Switch closest to the Output Jack, and the Volume Pot closest to the headstock. This is great for those who love to utilize volume swells.

Lindy Fralin Pickups Normal Or Flipped Orientation

 

 

 

 

 

 

 

 

 

Wiring

We can wire up your switch a couple of different ways – here are your options:

  • 3-Way CRL: This will give you normal Telecaster functionality – Bridge Only / Bridge – Neck / Neck Only.
  • 5-Way CRL: This is perfect for Nashville Telecasters, with three pickups.

Pot value:

Choose 250K Pots if you have single-coil Telecaster pickups or pickups that are brighter. 250K pots will make darker sounding pickups too dark and muddy.

Choose 500K Pots if you have Humbuckers, P-90’s, or other dark-sounding pickups. 500K pots will make single-coil Telecaster pickups sound too shrill.


Tone Cap Value:

Read up on our Tone Caps here.

  • .02 mfd sounds excellent on most Fender guitars and will give you a medium roll-off in tone.
  • .05 mfd will offer a much deeper and darker roll-off than .02.
  • Magic Cap: This is a low capacitance cap (.0015 mfd) and only works on the Bridge Pickup only. The effect is extremely subtle – not like a regular cap. It tends to make treble strings sound slightly fatter.

 

 

 

 

 

 

 

 

FAQs

  • Can you wire it up without the Chrome Plate? As it turns out, No. If this matters to you, you can pull out all the wiring once you receive it to put it in your Control Plate. It’s just too time-consuming and unsafe to ship without a solid control plate holding everything together.
  • Can I return my Control Plate? No. Since these are so custom and made to order, all Telecaster Control Plate sales are final, and not available for exchange or return.
  • What if I don’t see what I want? Please use the “Notes” field on the checkout screen to type in any special requests. Use this field to describe how you want it wired as well if you wish to have anything customized. We’ll make it to your specs.

 

 

 

 

 

 

 

 

Sizing

Telecaster Control Plate Dimensions

 

 

 

 

 

 

 

 

 

Installation

Installation is easy, and only takes  a few steps. Check out our in-depth Telecaster Control Plate Installation Guide Below:

Telecaster Control Plate Installation Guide

 

 

 

 

 

 

 

 

 

Tech Specs

Coming Soon

We don't have Tech Specs at the moment, but we will have them up soon!

Prewired Telecaster Control Plate FAQ's

General FAQs

Here are quick answers to common questions we get:

There are no reviews yet.

Be the first to review “Prewired Telecaster Control Plate”

Leave a review for our Prewired Telecaster Control Plate

Your email address will not be published. Required fields are marked *

NOTES ON FINISH:
  • Aged Control Plates are aged by hand and feature slight defects and a raw look. We cannot guarantee that the plate you receive will look like our photos - they are all unique.
  • We cannot guarantee finish matching of the plate and knobs perfectly. Because of this, we cannot provide a return to you if you are unhappy with the finish matching of our Prewired Telecaster Control Plate.
HARNESSES:
  • Our parts and wire lengths are designed to work seamlessly with our Prewired Telecaster Control Plate. Due to various guitar and instrument designs, we cannot guarantee that our parts will fit properly, and due to this, we do not offer Wiring Harnesses.

STAY IN TOUCH