P-J Set INFO:
Want to learn more about our P-J Set? Here's all the information you'll need:
P-J Set FEATURES:
The Fralin P-J Set includes our Stock P-Bass pickup, and our noiseless and rich Split Jazz Bridge. This set is noiseless in all positions, with a fat and rich tone. Our Split Jazz Bridge has a Left-Right coil design, which sounds better than stacked coils. The Fralin P-J Set gives you more snarl on your bridge and deep lows on your neck.
All of our bass pickups feature hand-built bobbins and hand-wound clarity. Our manufacturing process allows us to achieve unparalleled quality control. This P-J Set consists of local fiberboard and USA-Made Magnets. We wind each pickup by hand, one at a time. Each pickup is wound using our proprietary “Sectioning” technique. This gives the pickup a sweet, clear tone. Finally, we wax-pot the pickup to preserve the pickup and prevent microphonics.
- Original Fender specifications, with modern output
- Overwound Noiseless Bridge for noiseless operation across all positions
- USA-made Alnico 5 Magnets for optimal tonal balance and output
- Hand-wound with our “Sectioning” technique for unique, dynamic tone
- Hand-built fiberboard Bobbins for unrivaled quality control
- 10-Year Warranty on manufacturing defects
The Fralin P-J Set is the best sounding P-J Pickup Set you can buy. Alnico 5 Magnets and our hand-wound coils give this P-J Set an impressive range and articulation. Expect deep, rich lows and a top-end sparkle – all across a warm and fat midrange. The P-Bass pickup has an even balance across highs and lows. The compensated Split Jazz Bridge focuses more on a thicker midrange snarl. The volume is equal across all positions. The Fralin P-J Set will breathe life into your bass by extending its range and dynamics.
See below for the estimated DCR and Polarity Information for our P-J Set.
|Neck Ohm Reading:||11.2K 1|
|Bridge Ohm Reading:||12.5K 1|
|Magnet Material:||USA-Made Alnico 5|
|Neck Magnet Wire:||USA-Made 42-Gauge FormVar|
|Bridge Magnet Wire:||USA-Made 43-Gauge Single Poly Nylon|
|Bobbin Material (Both pickups):||USA-Made Fiberboard|
|Recommended Pot Value:||250K|
|Recommended Cap Value:||0.02mfd 2|
1 Ohm Readings can vary due to a multitude of factors, including ambient temperature, multimeter calibration, different wire batches, and other factors. Due to this, ohm readings are approximate. Learn more about Ohm Readings here.
2 We recommend a 0.02mfd Cap Value on most guitar and bass pickups. The exception is a Magic Cap, which Lindy prefers on the Bridge Pickup of Fender® guitars only. Learn More about Caps Here.
P-J Set FAQ's
Here are quick answers to common questions we get:
What Ohm Readings does your P-J Set have?
Navigate to our Tech Specs tab for complete Ohm Readings and more useful information.
Will this pickup fit my instrument?
Check our "Sizing" tab for the size of the pickup. No Sizing tab? Check under the product image gallery for dimensions.
Is your Lead Time of 2-3 Weeks accurate?
It really depends on the shop capacity at the moment, and the size of your order. Feel free to give us a call for an accurate lead time. We always try to underpromise and overdeliver.
What pickup height do you recommend setting your P-J Sets to?
Our recommended Pickup Height is 1/8" (3.175mm) on the Bass Side and 1/16"( 1.5875mm) on the Treble Side. Measure by holding the corresponding side down at its highest fret and measure from the bottom of the string to the top of the pole piece.
GET IT PREWIRED
Go the extra mile and combine our P-J Set with a Jazz Bass Control Plate!:
STAY IN TOUCH