Setting your pickup’s height properly is probably the most overlooked step in purchasing a set of pickups. It would be like purchasing a new car and not inflating the tires. Pickup height is a critical element of your guitar’s tone. Set too low, and your pickup is inefficient and weak. Set too high, and your pickup will cause all sorts of problems for you. Let’s delve into why pickup height matters, and how to set it properly!
Why Pickup Height Matters:
Setting your pickups to the correct height, your pickup’s magnets create a strong magnetic field that give your guitar the tone that you love. Set too high, and your strings can push and pull your strings out of tune. The Magnetic Field is not optimized when the pickup is set too low.
This article is mainly focused around pickups that feature Alnico Magnets – think Stratocaster or Telecaster. P90-Style pickups really benefit from the entire pickup raised to the optimized height, then fine-tuning the string balance with pole pieces. Split Blades are a different beast: check the video below to see Lindy adjust some Split Blades.
How To Measure:
- Start by pressing the Low E String (Bass Side) down at the highest fret, and hold it while you measure.
- Measure the distance from the bottom of the string to the top of the Low E Pole.
- Do the same thing on the High E String (Treble Side).
Let’s clear something up: there is no 100% correct height. That said, here is a great starting point:
The reason why there is no “100% correct” height, is that every guitar, player, and playing style differs. One guitarist may play harder than another guitarist, and one guitar may have thicker and heavier gauge guitar strings than another!
1.) Setting Pickup Height Too High:
Setting your pickup height too high will cause your magnets to push and pull your strings out of tune. Here’s a quick way to tell if this is happening to you: play the Low E string at a high fret (15th fret is a good one to start at). You might hear a “warbling” sound. That sound is your magnet fighting your string. Back the string away until the “warbling” sound disappears!
2.) Setting Pickup Height Too Low:
Setting your pickup height too low would cause your pickup to not be optimized for your guitar. Your magnetic field “floats” above the pickup, and if your strings are out of the field, you won’t get a rich, full tone. That said, backing off on your pickup’s height will cause your bass to thin and your pickup to sound a bit “sweeter” – you might like it! Experiment!
3.) Wrong Orientation:
The correct pickup height orientation is lower on the bass side and closer on the treble side. Your Bass strings have more mass and will disturb the magnetic field more than treble strings. Reversing your pickup height orientation will provide you with “warbling” bass strings and thin treble strings – not cool.
Lindy’s Take On it:
As Lindy likes to explain it, adjusting your pickup’s height is not all about measuring, it’s about listening as well!
Well, that about does it for this month. Stay tuned for future articles!